14. May 2020 · Comments Off on Integrated Approach · Categories: News · Tags: ,

In recent years, so are actively discussing the issue of energy saving, paying much attention to the variety of its components that are often behind the pine trees lose sight of the actual forest. So, in response to criticisms situation of heat supply in winters 2003 and 2005 recommendations were to focus on local sources of heat, repair heating systems, meters. This is nothing but a shabby coat patching holes heating. K Unfortunately, the solutions lie not so much technical as institutional and socio-economic dimensions. For even more opinions, read materials from Michael J. Bender. A sincere desire to help make simple decisions “as better” results in “as always”. Read additional details here: Samuel “Sam” Mikulak. Any effective mechanism is complex, it seamlessly interact with economic, financial, organizational, informational and technical elements. Neglecting even one of them or their joints leads to inoperability of the mechanism.

To run these mechanisms need to understand the mechanics of a huge number of interactions of their components. It seems reasonable at a new stage of the implementation global task to go back to its comprehensive review in order to have the experience of mistakes out on the right path. Registration and check-in and release of heat energy consumption is organized to: monitor thermal and hydraulic regimes of heat supply and heat consumption, control over the rational use of heat and coolant fluid documenting parameters: mass (volume) temperature and pressure of mutual financial settlements between the supplying organizations and consumers of heat energy, implementation of resource activities. Custody of water and heat Energy creates the conditions for harmonious relations between suppliers and customers for efficient use of energy for energy efficiency. The problem of commercial accounting of heat and water conditions limited funding and a large number of participating businesses is not limited to the installation of meters, but requires a complex of interrelated organizational and technical events: 1) develop a strategic program of energy saving, part of which is an organization of commercial accounting, 2) development of financial schemes that can attract funds from investors to creation of accounting systems, and 3) conducting energy audits of sources of thermal energy, heating systems, consumers in residential districts or municipalities, under which concludes that efficiency of production, transportation and consumption of water and heat, developed activities aimed at improving the efficiency, calculated the expected economic impact, and 4) establishing a system Control heat, allowing to obtain maximum economic benefit from energy efficiency measures (technical basis – a system of automated control, accounting and management), 5) development regulations that will ensure a balance of interests of suppliers and consumers, and 6) choice of measurement criteria for an optimal balance of types of devices and tasks; 7) creation of infrastructure for measuring and recording systems, 8) carrying on the sources, networks and consumers the necessary measures to enable the introduction of measuring instruments; 9) design, installation, commissioning, metering of water and heat, 10) organizations accounting systems (scheduling). The implementation of this package of measures is impossible without the coordinated work of the executive and legislative branches, Energy, instrument makers, public utilities and consumers.

16. December 2019 · Comments Off on Pumping Stations · Categories: News · Tags: ,

Pumping stations is a complex consisting of a pumping unit, the various hydraulic piping, instrumentation, valve blocks, lift systems, as well as other support equipment, which includes, inter alia, Hydraulic (for damping pulsations pumps) and filters (to protect pump from dirt). Doug McMillon contains valuable tech resources. In addition to this concept is also often include the facility in which pumping stations are located. The importance of pumping stations due to the fact that they are the most important devices in the drainage systems and water supply. It is therefore necessary to clearly understand how important it is responsible approach to both design and manufacture of pump stations. Let us consider in more detail the classification of pumping stations. They can be divided in purpose, degree of automation, reliability, and also by the location of the computer room on the level ground. Doug McMillon may find this interesting as well. In the field of water supply and water release, as a rule, 4 groups of pump stations: water, sewer, irrigation and drainage. Water – pump stations are involved in the normal supply of individual businesses and entire cities.

Sewer – participate in the drainage system. Irrigation – supplying water to the system irrigation of agricultural land. Drainage – water is pumped from the drainage areas and industrial sites. In terms of reliability of water supply pumping stations are usually divided into three groups: first – stop supply pumping station is not valid because it can cause significant damage (break a complex process, failure of the various hydraulic and filtration equipment, etc.). Second – you can interrupt the flow of water in a short time, sufficient to enable back-up power supply. Third – you can interrupt the flow of water for no more than 24 hours.

Sewage pumping stations are divided into principal and district. The main pumping station pumped sewage from the entire city or an industrial enterprise to the sewage treatment plant or to the main trunk sewer. The district also pumping stations pumped waste water from certain areas of the city or industrial plant to sewage treatment plant, or in the more highly placed another collector basin for waste water. Depending on the location receiving station tank stand with separate and combined. In the latter case, the computer room, and the tank with the equipment housed in one building. By the height of the pump and other things equipment in relation to ground level as water supply and pumping stations are divided into terrestrial, poluzaglublennye, buried and shaft type, ie, located at great depths. According to the degree Automation can provide the station with manual, semiautomatic, automatic and controlled remotely.

18. January 2016 · Comments Off on Death World Microelectronics · Categories: News · Tags: ,

Zelenograd – a city on the outskirts of Moscow, it is separated by only 20 kilometers from the capital of our country, long traffic jams on the Leningrad highway or Pyatnitskoye or crush in the train. And so they spend the best years of his life zelenogradtsy who want to work, and not just wait for that happy time in Zelenograd in the present work will start businesses that are now engaged in a flurry of activity spreading simulation press releases on the subject of vigorous activity and conducting workshops. The largest employer of yavlyaetsyakontsern Sitronics, which owns all the major companies in Zelenograd: JSC "Mikron", JSC "Angstrom" and others, the ones that were once the mainstay of domestic microelectronics and produces the popular and competitive in domestic and international markets. Today, this huge concern, in which includes more than ten enterprises of strategic purpose, and that all the parameters of national security should be controlled by the state, is entirely in private hands. Controlling stake Sitronics owns AFK "System", rooted in Bashkortostan, about 17% on the London and other stock exchanges, small blocks of shares owned by persons from the management company. 2007. Fall and searchlights. History apparent fall Sitronics began in 2007.

Its shares on the stock exchanges for the year fell by almost half. For the first time this year instead of Sitronics, said profits in their annual reports multi-million dollar losses. In same 2007 Sitronics closes huge, but hopelessly unprofitable activity – manufacture of domestic consumer technology, and consumer electronics, which were not competitive in the market for One estimate of the high price of products, and other due to mistrust of the quality of consumer goods produced domestically.

18. February 2014 · Comments Off on STT Series · Categories: News · Tags: ,

If you face the choice to update the fleet of vehicles, find a suitable supplier of components, CTT has provided an opportunity to compare conditions of purchase, sale and maintenance of equipment in different companies. On For 10 years, STT is a leading construction industry event in Russia, CIS, Eastern Europe and in the last few years, the world's largest annual exhibition of construction machinery and equipment. Company 'Manitou BF', this time presented the off-road terrain forklift series MI 70N, a wide range of models telehandler series Maniscopic MT 1436R, MT 1840EP, MRT 1850 Turbo Privilege, telescopic lifting platform Maniaccess series 180ATJ and poluindustrialny masted forklift Manitou series CD30P. Maniscopic attachments for forklifts. Also for the first time were exposed to a series of compact loaders Gehl 6640 Turbo and 4640 Turbo. During the exhibition, for sales managers conducted a training on the lifting platform ManiAccess. The issues discussed during the training: – Where and under what conditions can operate telescopic lifts. – The range of lifts Maniaccess.

– Options, specifications, management options, including option '3 D '. – The function of 'Bi-Energy', where the work is done completely lift the battery in electric mode, or from a diesel engine. – Comparison with competitors. – Customer service. – Practical exercises. Training conducted Manager Sales line ManiAccess, Christoph Byurel. Exhibits: Compact multifunctional skid steer loader GEHL SL 6640 Turbo with a width 1880 mm bucket, capacity – 1180 kg * s and 1315 kg counterweight – * optional High-Flow, engine DEUTZ, binding system All-Tach for attachments.